First commit.
This commit is contained in:
commit
cf9e2b0cb4
|
|
@ -0,0 +1,7 @@
|
|||
FreeBSD on Lenovo x260
|
||||
======================
|
||||
This repository contains configuration files for a more-or-less working x260 laptop on FreeBSD 13. There's some additional work to do, but with the tweaks here, the following works:
|
||||
|
||||
- Wayland with Sway (Sway settings in [separate repo](https://git.oxcrag.net/mikaelh/swayconfig)).
|
||||
- Screen brightness can be controlled with the Fn+F5 and Fn+F6 keys.
|
||||
- Computer goes to sleep when lid is closed. Unfortunately Wayland+Sway crashes upon wake-up, but it's possible to switch to a separate TTY, kill Sway and re-login.
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
cryptodev_load="YES"
|
||||
zfs_load="YES"
|
||||
acpi_ibm_load="YES"
|
||||
acpi_video_load="YES"
|
||||
efi_max_resolution="1920x1080"
|
||||
|
|
@ -0,0 +1,282 @@
|
|||
# $FreeBSD$
|
||||
#
|
||||
# Refer to devd.conf(5) and devd(8) man pages for the details on how to
|
||||
# run and configure devd.
|
||||
#
|
||||
|
||||
# NB: All regular expressions have an implicit ^$ around them.
|
||||
# NB: device-name is shorthand for 'match device-name'
|
||||
|
||||
options {
|
||||
# Each "directory" directive adds a directory to the list of
|
||||
# directories that we scan for files. Files are loaded in the order
|
||||
# that they are returned from readdir(3). The rule-sets are combined
|
||||
# to create a DFA that's used to match events to actions.
|
||||
directory "/etc/devd";
|
||||
directory "/usr/local/etc/devd";
|
||||
pid-file "/var/run/devd.pid";
|
||||
|
||||
# Setup some shorthand for regex that we use later in the file.
|
||||
#XXX Yes, this is gross -- imp
|
||||
set wifi-driver-regex
|
||||
"(ath|bwi|bwn|ipw|iwlwifi|iwi|iwm|iwn|malo|mwl|otus|ral|rsu|rtw|rtwn|rum|\
|
||||
run|uath|upgt|ural|urtw|wpi|wtap|zyd)[0-9]+";
|
||||
};
|
||||
|
||||
# x260-specific config
|
||||
notify 10 {
|
||||
match "system" "ACPI";
|
||||
match "subsystem" "IBM";
|
||||
action "/usr/local/sbin/acpi_oem_exec.sh $notify ibm";
|
||||
};
|
||||
|
||||
# Note that the attach/detach with the highest value wins, so that one can
|
||||
# override these general rules.
|
||||
|
||||
#
|
||||
# Configure the interface on attach. Due to a historical accident, this
|
||||
# script is called pccard_ether. We omit the usbus devices because those
|
||||
# devices are associated with the USB Bus and provide an ifnet device to
|
||||
# allow usb traffic to be captured with usbdump(8).
|
||||
#
|
||||
# NB: DETACH events are ignored; the kernel should handle all cleanup
|
||||
# (routes, arp cache). Beware of races against immediate create
|
||||
# of a device with the same name; e.g.
|
||||
# ifconfig bridge0 destroy; ifconfig bridge0 create
|
||||
#
|
||||
notify 0 {
|
||||
match "system" "IFNET";
|
||||
match "subsystem" "!(usbus|wlan)[0-9]+";
|
||||
match "type" "ATTACH";
|
||||
action "/etc/pccard_ether $subsystem start";
|
||||
};
|
||||
|
||||
#
|
||||
# Try to start dhclient on Ethernet-like interfaces when the link comes
|
||||
# up. Only devices that are configured to support DHCP will actually
|
||||
# run it. No link down rule exists because dhclient automatically exits
|
||||
# when the link goes down.
|
||||
#
|
||||
notify 0 {
|
||||
match "system" "IFNET";
|
||||
match "type" "LINK_UP";
|
||||
media-type "ethernet";
|
||||
action "service dhclient quietstart $subsystem";
|
||||
};
|
||||
|
||||
#
|
||||
# Like Ethernet devices, but separate because 802.11 require spawning
|
||||
# wlan(4) interface.
|
||||
#
|
||||
attach 0 {
|
||||
device-name "$wifi-driver-regex";
|
||||
action "/etc/pccard_ether $device-name startchildren";
|
||||
};
|
||||
detach 0 {
|
||||
device-name "$wifi-driver-regex";
|
||||
action "/etc/pccard_ether $device-name stopchildren";
|
||||
};
|
||||
notify 0 {
|
||||
match "system" "IFNET";
|
||||
match "type" "LINK_UP";
|
||||
media-type "802.11";
|
||||
action "service dhclient quietstart $subsystem";
|
||||
};
|
||||
|
||||
# An entry like this might be in a different file, but is included here
|
||||
# as an example of how to override things. Normally 'ed50' would match
|
||||
# the above attach/detach stuff, but the value of 100 makes it
|
||||
# hard wired to 1.2.3.4.
|
||||
attach 100 {
|
||||
device-name "ed50";
|
||||
action "ifconfig $device-name inet 1.2.3.4 netmask 0xffff0000";
|
||||
};
|
||||
detach 100 {
|
||||
device-name "ed50";
|
||||
};
|
||||
|
||||
# When a USB Bluetooth dongle appears, activate it
|
||||
attach 100 {
|
||||
device-name "ubt[0-9]+";
|
||||
action "service bluetooth quietstart $device-name";
|
||||
};
|
||||
detach 100 {
|
||||
device-name "ubt[0-9]+";
|
||||
action "service bluetooth quietstop $device-name";
|
||||
};
|
||||
|
||||
# Firmware downloader for Atheros AR3011 based USB Bluetooth devices
|
||||
#attach 100 {
|
||||
# match "vendor" "0x0cf3";
|
||||
# match "product" "0x3000";
|
||||
# action "sleep 2 && /usr/sbin/ath3kfw -d $device-name -f /usr/local/etc/ath3k-1.fw";
|
||||
#};
|
||||
|
||||
# When a USB keyboard arrives, attach it as the console keyboard.
|
||||
attach 100 {
|
||||
device-name "ukbd0";
|
||||
action "service syscons setkeyboard /dev/ukbd0";
|
||||
};
|
||||
detach 100 {
|
||||
device-name "ukbd0";
|
||||
action "service syscons setkeyboard /dev/kbd0";
|
||||
};
|
||||
|
||||
notify 100 {
|
||||
match "system" "DEVFS";
|
||||
match "subsystem" "CDEV";
|
||||
match "type" "CREATE";
|
||||
match "cdev" "atp[0-9]+";
|
||||
|
||||
action "service moused quietstart $cdev";
|
||||
};
|
||||
|
||||
notify 100 {
|
||||
match "system" "DEVFS";
|
||||
match "subsystem" "CDEV";
|
||||
match "type" "CREATE";
|
||||
match "cdev" "ums[0-9]+";
|
||||
|
||||
action "service moused quietstart $cdev";
|
||||
};
|
||||
|
||||
notify 100 {
|
||||
match "system" "DEVFS";
|
||||
match "subsystem" "CDEV";
|
||||
match "type" "CREATE";
|
||||
match "cdev" "wsp[0-9]+";
|
||||
|
||||
action "service moused quietstart $cdev";
|
||||
};
|
||||
|
||||
notify 100 {
|
||||
match "system" "DEVFS";
|
||||
match "subsystem" "CDEV";
|
||||
match "type" "DESTROY";
|
||||
match "cdev" "ums[0-9]+";
|
||||
|
||||
action "service moused stop $cdev";
|
||||
};
|
||||
|
||||
# Don't even try to second guess what to do about drivers that don't
|
||||
# match here. Instead, pass it off to syslog. Commented out for the
|
||||
# moment, as the pnpinfo variable isn't set in devd yet. Individual
|
||||
# variables within the bus supplied pnpinfo are set.
|
||||
nomatch 0 {
|
||||
# action "logger Unknown device: $pnpinfo $location $bus";
|
||||
};
|
||||
|
||||
# Various logging of unknown devices.
|
||||
nomatch 10 {
|
||||
match "bus" "uhub[0-9]+";
|
||||
action "logger Unknown USB device: vendor $vendor product $product \
|
||||
bus $bus";
|
||||
};
|
||||
|
||||
# Some Cardbus cards don't offer numerical manufacturer/product IDs, just
|
||||
# show the CIS info there.
|
||||
nomatch 10 {
|
||||
match "bus" "cardbus[0-9]+";
|
||||
action "logger Unknown Cardbus device: device $device class $class \
|
||||
vendor $vendor bus $bus";
|
||||
};
|
||||
|
||||
# Switch power profiles when the AC line state changes.
|
||||
notify 10 {
|
||||
match "system" "ACPI";
|
||||
match "subsystem" "ACAD";
|
||||
action "service power_profile $notify";
|
||||
};
|
||||
|
||||
# Notify all users before beginning emergency shutdown when we get
|
||||
# a _CRT or _HOT thermal event and we're going to power down the system
|
||||
# very soon.
|
||||
notify 10 {
|
||||
match "system" "ACPI";
|
||||
match "subsystem" "Thermal";
|
||||
match "notify" "0xcc";
|
||||
action "logger -p kern.emerg WARNING: system temperature too high, shutting down soon!";
|
||||
};
|
||||
|
||||
# User requested suspend, so perform preparation steps and then execute
|
||||
# the actual suspend process.
|
||||
notify 10 {
|
||||
match "system" "ACPI";
|
||||
match "subsystem" "Suspend";
|
||||
action "/etc/rc.suspend acpi $notify";
|
||||
};
|
||||
notify 10 {
|
||||
match "system" "ACPI";
|
||||
match "subsystem" "Resume";
|
||||
action "/etc/rc.resume acpi $notify";
|
||||
};
|
||||
|
||||
/* EXAMPLES TO END OF FILE
|
||||
|
||||
# Examples of notify hooks. A notify is a generic way for a kernel
|
||||
# subsystem to send event notification to userland.
|
||||
|
||||
# Here are some examples of ACPI notify handlers. ACPI subsystems that
|
||||
# generate notifies include the AC adapter, power/sleep buttons,
|
||||
# control method batteries, lid switch, and thermal zones.
|
||||
#
|
||||
# Information returned is not always the same as the ACPI notify
|
||||
# events. See the ACPI specification for more information about
|
||||
# notifies. Here is the information returned for each subsystem:
|
||||
#
|
||||
# ACAD: AC line state (0 is offline, 1 is online)
|
||||
# Button: Button pressed (0 for power, 1 for sleep)
|
||||
# CMBAT: ACPI battery events
|
||||
# Lid: Lid state (0 is closed, 1 is open)
|
||||
# Suspend, Resume: Suspend and resume notification
|
||||
# Thermal: ACPI thermal zone events
|
||||
#
|
||||
# This example calls a script when the AC state changes, passing the
|
||||
# notify value as the first argument. If the state is 0x00, it might
|
||||
# call some sysctls to implement economy mode. If 0x01, it might set
|
||||
# the mode to performance.
|
||||
notify 10 {
|
||||
match "system" "ACPI";
|
||||
match "subsystem" "ACAD";
|
||||
action "/etc/acpi_ac $notify";
|
||||
};
|
||||
|
||||
# This example works around a memory leak in PostgreSQL, restarting
|
||||
# it when the "user:postgres:swap:devctl=1G" rctl(8) rule gets triggered.
|
||||
notify 0 {
|
||||
match "system" "RCTL";
|
||||
match "rule" "user:770:swap:.*";
|
||||
action "service postgresql restart";
|
||||
};
|
||||
|
||||
# Discard autofs caches, useful for the -media special map.
|
||||
notify 100 {
|
||||
match "system" "GEOM";
|
||||
match "subsystem" "DEV";
|
||||
action "/usr/sbin/automount -c";
|
||||
};
|
||||
|
||||
# Handle userland coredumps.
|
||||
# This commented out handler makes it possible to run an
|
||||
# automated debugging session after the core dump is generated.
|
||||
# Replace action with a proper coredump handler, but be aware that
|
||||
# it will run with elevated privileges.
|
||||
notify 10 {
|
||||
match "system" "kernel";
|
||||
match "subsystem" "signal";
|
||||
match "type" "coredump";
|
||||
action "logger $comm $core";
|
||||
};
|
||||
|
||||
# Let the init(8) know there's a new USB serial interface it might
|
||||
# want to run getty(8) for. This includes device-side tty created
|
||||
# by usb_template(4).
|
||||
notify 100 {
|
||||
match "system" "DEVFS";
|
||||
match "subsystem" "CDEV";
|
||||
match "type" "CREATE";
|
||||
match "cdev" "ttyU[0-9]+";
|
||||
action "/sbin/init q";
|
||||
};
|
||||
|
||||
*/
|
||||
|
|
@ -0,0 +1,243 @@
|
|||
# $FreeBSD$
|
||||
# from: @(#)gettytab 5.14 (Berkeley) 3/27/91
|
||||
#
|
||||
# Most of the table entries here are just copies of the old getty table,
|
||||
# it is by no means certain, or even likely, that any of them are optimal
|
||||
# for any purpose whatever. Nor is it likely that more than a couple are
|
||||
# even correct.
|
||||
#
|
||||
# The default gettytab entry, used to set defaults for all other
|
||||
# entries, and in cases where getty is called with no table name.
|
||||
#
|
||||
# cb, ce and ck are desirable on most crt's. The non-crt entries need to
|
||||
# be changed to turn them off (:cb@:ce@:ck@:).
|
||||
#
|
||||
# lc should always be on; it's a remainder of some stone age when there
|
||||
# have been terminals around not being able of handling lower-case
|
||||
# characters. Those terminals aren't supported any longer, but getty is
|
||||
# `smart' about them by default.
|
||||
#
|
||||
# Parity defaults to even, but the Pc entry and all the `std' entries
|
||||
# specify no parity. The different parities are:
|
||||
# (none): same as ep for getty. login will use terminal as is.
|
||||
# ep: getty will use raw mode (cs8 -parenb) (unless rw is set) and
|
||||
# fake parity. login will use even parity (cs7 parenb -parodd).
|
||||
# op: same as ep except odd parity (cs7 parenb parodd) for login.
|
||||
# getty will fake odd parity as well.
|
||||
# ap: same as ep except -inpck instead of inpck for login.
|
||||
# ap overrides op and ep.
|
||||
# np: 1. don't fake parity in getty. The fake parity garbles
|
||||
# characters on non-terminals (like pccons) that don't
|
||||
# support parity. It would probably better for getty not to
|
||||
# try to fake parity. It could just use cbreak mode so as
|
||||
# not to force cs8 and let the hardware handle the parity.
|
||||
# login has to be rely on the hardware anyway.
|
||||
# 2. set cs8 -parenb -istrip -inpck.
|
||||
# ep:op: same as ap.
|
||||
#
|
||||
default:\
|
||||
:cb:ce:ck:lc:fd#1000:im=\r\n%s/%m (%h) (%t)\r\n\r\n:sp#1200:\
|
||||
:if=/etc/issue:
|
||||
|
||||
#
|
||||
# Fixed speed entries
|
||||
#
|
||||
# The "std.NNN" names are known to the special case
|
||||
# portselector code in getty, however they can
|
||||
# be assigned to any table desired.
|
||||
# The "NNN-baud" names are known to the special case
|
||||
# autobaud code in getty, and likewise can
|
||||
# be assigned to any table desired (hopefully the same speed).
|
||||
#
|
||||
std:\
|
||||
:np:sp#0:
|
||||
a|std.110|110-baud:\
|
||||
:np:nd#1:cd#1:uc:sp#110:
|
||||
b|std.134|134.5-baud:\
|
||||
:np:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl:
|
||||
1|std.150|150-baud:\
|
||||
:np:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 :
|
||||
c|std.300|300-baud:\
|
||||
:np:nd#1:cd#1:sp#300:
|
||||
d|std.600|600-baud:\
|
||||
:np:nd#1:cd#1:sp#600:
|
||||
f|std.1200|1200-baud:\
|
||||
:np:fd#1:sp#1200:
|
||||
6|std.2400|2400-baud:\
|
||||
:np:sp#2400:
|
||||
7|std.4800|4800-baud:\
|
||||
:np:sp#4800:
|
||||
2|std.9600|9600-baud:\
|
||||
:np:sp#9600:
|
||||
g|std.19200|19200-baud:\
|
||||
:np:sp#19200:
|
||||
std.38400|38400-baud:\
|
||||
:np:sp#38400:
|
||||
std.57600|57600-baud:\
|
||||
:np:sp#57600:
|
||||
std.115200|115200-baud:\
|
||||
:np:sp#115200:
|
||||
std.230400|230400-baud:\
|
||||
:np:sp#230400:
|
||||
|
||||
#
|
||||
# Entry specifying explicit device settings. See termios(4) and
|
||||
# /usr/include/termios.h, too. The entry forces the tty into
|
||||
# CLOCAL mode (so no DCD is required), and uses Xon/Xoff flow control.
|
||||
#
|
||||
# cflags: CLOCAL | HUPCL | CREAD | CS8
|
||||
# oflags: OPOST | ONLCR | OXTABS
|
||||
# iflags: IXOFF | IXON | ICRNL | IGNPAR
|
||||
# lflags: IEXTEN | ICANON | ISIG | ECHOCTL | ECHO | ECHOK | ECHOE | ECHOKE
|
||||
#
|
||||
# The `0' flags don't have input enabled. The `1' flags don't echo.
|
||||
# (Echoing is done inside getty itself.)
|
||||
#
|
||||
local.9600|CLOCAL tty @ 9600 Bd:\
|
||||
:c0#0x0000c300:c1#0x0000cb00:c2#0x0000cb00:\
|
||||
:o0#0x00000007:o1#0x00000002:o2#0x00000007:\
|
||||
:i0#0x00000704:i1#0x00000000:i2#0x00000704:\
|
||||
:l0#0x000005cf:l1#0x00000000:l2#0x000005cf:\
|
||||
:sp#9600:np:
|
||||
|
||||
#
|
||||
# Dial in rotary tables, speed selection via 'break'
|
||||
#
|
||||
0|d300|Dial-300:\
|
||||
:nx=d1200:cd#2:sp#300:
|
||||
d1200|Dial-1200:\
|
||||
:nx=d150:fd#1:sp#1200:
|
||||
d150|Dial-150:\
|
||||
:nx=d110:lm@:tc=150-baud:
|
||||
d110|Dial-110:\
|
||||
:nx=d300:tc=300-baud:
|
||||
|
||||
#
|
||||
# Fast dialup terminals, 2400/1200/300 rotary (can start either way)
|
||||
#
|
||||
D2400|d2400|Fast-Dial-2400:\
|
||||
:nx=D1200:tc=2400-baud:
|
||||
3|D1200|Fast-Dial-1200:\
|
||||
:nx=D300:tc=1200-baud:
|
||||
5|D300|Fast-Dial-300:\
|
||||
:nx=D2400:tc=300-baud:
|
||||
|
||||
#
|
||||
#telebit (19200)
|
||||
#
|
||||
t19200:\
|
||||
:nx=t2400:tc=19200-baud:
|
||||
t2400:\
|
||||
:nx=t1200:tc=2400-baud:
|
||||
t1200:\
|
||||
:nx=t19200:tc=1200-baud:
|
||||
|
||||
#
|
||||
#telebit (9600)
|
||||
#
|
||||
t9600:\
|
||||
:nx=t2400a:tc=9600-baud:
|
||||
t2400a:\
|
||||
:nx=t1200a:tc=2400-baud:
|
||||
t1200a:\
|
||||
:nx=t9600:tc=1200-baud:
|
||||
|
||||
#
|
||||
# Odd special case terminals
|
||||
#
|
||||
-|tty33|asr33|Pity the poor user of this beast:\
|
||||
:tc=110-baud:
|
||||
|
||||
4|Console|Console Decwriter II:\
|
||||
:nd@:cd@:rw:tc=300-baud:
|
||||
|
||||
e|Console-1200|Console Decwriter III:\
|
||||
:fd@:nd@:cd@:rw:tc=1200-baud:
|
||||
|
||||
i|Interdata console:\
|
||||
:uc:sp#0:
|
||||
|
||||
l|lsi chess terminal:\
|
||||
:sp#300:
|
||||
|
||||
X|Xwindow|X window system:\
|
||||
:fd@:nd@:cd@:rw:sp#9600:
|
||||
|
||||
P|Pc|Pc console:\
|
||||
:ht:np:sp#9600:
|
||||
|
||||
#
|
||||
# Weirdo special case for fast crt's with hardcopy devices
|
||||
#
|
||||
8|T9600|CRT with hardcopy:\
|
||||
:nx=T300:tc=9600-baud:
|
||||
9|T300|CRT with hardcopy (300):\
|
||||
:nx=T9600:tc=300-baud:
|
||||
|
||||
#
|
||||
# Plugboard, and misc other terminals
|
||||
#
|
||||
plug-9600|Plugboard-9600:\
|
||||
:pf#1:tc=9600-baud:
|
||||
p|P9600|Plugboard-9600-rotary:\
|
||||
:pf#1:nx=P300:tc=9600-baud:
|
||||
q|P300|Plugboard-300:\
|
||||
:pf#1:nx=P1200:tc=300-baud:
|
||||
r|P1200|Plugboard-1200:\
|
||||
:pf#1:nx=P9600:tc=1200-baud:
|
||||
|
||||
#
|
||||
# XXXX Port selector
|
||||
#
|
||||
s|DSW|Port Selector:\
|
||||
:ps:sp#2400:
|
||||
|
||||
#
|
||||
# Auto-baud speed detect entry for Micom 600.
|
||||
# Special code in getty will switch this out
|
||||
# to one of the NNN-baud entries.
|
||||
#
|
||||
A|Auto-baud:\
|
||||
:ab:sp#2400:f0#040:
|
||||
|
||||
#
|
||||
# autologin - automatically log in as root
|
||||
#
|
||||
|
||||
autologin|al.9600:\
|
||||
:al=root:tc=std.9600:
|
||||
al.19200:\
|
||||
:al=root:tc=std.19200:
|
||||
al.38400:\
|
||||
:al=root:tc=std.38400:
|
||||
al.57600:\
|
||||
:al=root:tc=std.57600:
|
||||
al.115200:\
|
||||
:al=root:tc=std.115200:
|
||||
al.230400:\
|
||||
:al=root:tc=std.230400:
|
||||
al.Pc:\
|
||||
:al=root:tc=Pc
|
||||
|
||||
#
|
||||
# Entries for 3-wire serial terminals. These don't supply carrier, so
|
||||
# clocal needs to be set, and crtscts needs to be unset.
|
||||
#
|
||||
3wire:\
|
||||
:np:nc:sp#0:
|
||||
3wire.9600|9600-3wire:\
|
||||
:np:nc:sp#9600:
|
||||
3wire.19200|19200-3wire:\
|
||||
:np:nc:sp#19200:
|
||||
3wire.38400|38400-3wire:\
|
||||
:np:nc:sp#38400:
|
||||
3wire.57600|57600-3wire:\
|
||||
:np:nc:sp#57600:
|
||||
3wire.115200|115200-3wire:\
|
||||
:np:nc:sp#115200:
|
||||
3wire.230400|230400-3wire:\
|
||||
:np:nc:sp#230400:
|
||||
|
||||
Ly:\
|
||||
:lo=/usr/local/bin/ly:\
|
||||
:al=root:
|
||||
|
|
@ -0,0 +1,14 @@
|
|||
hostname="x260.oxcrag.net"
|
||||
keymap="se.kbd"
|
||||
wlans_iwm0="wlan0"
|
||||
ifconfig_wlan0="WPA DHCP"
|
||||
ifconfig_wlan0_ipv6="inet6 accept_rtadv"
|
||||
moused_enable="YES"
|
||||
ntpd_enable="YES"
|
||||
powerd_enable="YES"
|
||||
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
|
||||
dumpdev="NO"
|
||||
devd_enable="YES"
|
||||
seatd_enable="YES"
|
||||
dbus_enable="YES"
|
||||
kld_list=i915kms
|
||||
|
|
@ -0,0 +1,15 @@
|
|||
# $FreeBSD$
|
||||
#
|
||||
# This file is read when going to multi-user and its contents piped thru
|
||||
# ``sysctl'' to adjust kernel values. ``man 5 sysctl.conf'' for details.
|
||||
#
|
||||
|
||||
# Uncomment this to prevent users from seeing information about processes that
|
||||
# are being run under another UID.
|
||||
#security.bsd.see_other_uids=0
|
||||
# dev.acpi_ibm.0.handlerevents=0x04\ 0x10\ 0x11
|
||||
# dev.acpi_ibm.0.handlerevents=1
|
||||
hw.acpi.lid_switch_state=s3
|
||||
hw.usb.no_suspend_wait=1
|
||||
kern.vt.suspendswitch=0
|
||||
kern.vt.deadtimer=60
|
||||
|
|
@ -0,0 +1,53 @@
|
|||
#
|
||||
# $FreeBSD$
|
||||
# @(#)ttys 5.1 (Berkeley) 4/17/89
|
||||
#
|
||||
# This file specifies various information about terminals on the system.
|
||||
# It is used by several different programs. Common entries for the
|
||||
# various columns include:
|
||||
#
|
||||
# name The name of the terminal device.
|
||||
#
|
||||
# getty The program to start running on the terminal. Typically a
|
||||
# getty program, as the name implies. Other common entries
|
||||
# include none, when no getty is needed, and xdm, to start the
|
||||
# X Window System.
|
||||
#
|
||||
# type The initial terminal type for this port. For hardwired
|
||||
# terminal lines, this will contain the type of terminal used.
|
||||
# For virtual consoles, the correct type is typically xterm.
|
||||
# Other common values include dialup for incoming modem ports, and
|
||||
# unknown when the terminal type cannot be predetermined.
|
||||
#
|
||||
# status Must be on or off. If on, init will run the getty program on
|
||||
# the specified port. If the word "secure" appears, this tty
|
||||
# allows root login.
|
||||
#
|
||||
# name getty type status comments
|
||||
#
|
||||
# If console is marked "insecure", then init will ask for the root password
|
||||
# when going to single-user mode.
|
||||
console none unknown off secure
|
||||
#
|
||||
ttyv0 "/usr/libexec/getty Pc" xterm onifexists secure
|
||||
# Virtual terminals
|
||||
ttyv1 "/usr/libexec/getty Ly" xterm on secure
|
||||
ttyv2 "/usr/libexec/getty Pc" xterm onifexists secure
|
||||
ttyv3 "/usr/libexec/getty Pc" xterm onifexists secure
|
||||
ttyv4 "/usr/libexec/getty Pc" xterm onifexists secure
|
||||
ttyv5 "/usr/libexec/getty Pc" xterm onifexists secure
|
||||
ttyv6 "/usr/libexec/getty Pc" xterm onifexists secure
|
||||
ttyv7 "/usr/libexec/getty Pc" xterm onifexists secure
|
||||
ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure
|
||||
# Serial terminals
|
||||
# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
|
||||
ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure
|
||||
ttyu1 "/usr/libexec/getty 3wire" vt100 onifconsole secure
|
||||
ttyu2 "/usr/libexec/getty 3wire" vt100 onifconsole secure
|
||||
ttyu3 "/usr/libexec/getty 3wire" vt100 onifconsole secure
|
||||
# Dumb console
|
||||
dcons "/usr/libexec/getty std.9600" vt100 off secure
|
||||
# Xen Virtual console
|
||||
xc0 "/usr/libexec/getty Pc" xterm onifconsole secure
|
||||
# RISC-V HTIF console
|
||||
rcons "/usr/libexec/getty std.9600" vt100 onifconsole secure
|
||||
|
|
@ -0,0 +1,34 @@
|
|||
# $FreeBSD$
|
||||
#
|
||||
# .profile - Bourne Shell startup script for login shells
|
||||
#
|
||||
# see also sh(1), environ(7).
|
||||
#
|
||||
|
||||
# These are normally set through /etc/login.conf. You may override them here
|
||||
# if wanted.
|
||||
# PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:$HOME/bin; export PATH
|
||||
|
||||
# Setting TERM is normally done through /etc/ttys. Do only override
|
||||
# if you're sure that you'll never log in via telnet or xterm or a
|
||||
# serial line.
|
||||
# TERM=xterm; export TERM
|
||||
|
||||
EDITOR=vim; export EDITOR
|
||||
PAGER=less; export PAGER
|
||||
|
||||
# set ENV to a file invoked each time sh is started for interactive use.
|
||||
ENV=$HOME/.shrc; export ENV
|
||||
|
||||
# Let sh(1) know it's at home, despite /home being a symlink.
|
||||
if [ "$PWD" != "$HOME" ] && [ "$PWD" -ef "$HOME" ] ; then cd ; fi
|
||||
|
||||
# Query terminal size; useful for serial lines.
|
||||
if [ -x /usr/bin/resizewin ] ; then /usr/bin/resizewin -z ; fi
|
||||
|
||||
# Display a random cookie on each login.
|
||||
if [ -x /usr/bin/fortune ] ; then /usr/bin/fortune freebsd-tips ; fi
|
||||
|
||||
# XDG_RUNTIME_DIR is required for Wayland. Don't forget to create user dirs
|
||||
# and set the ownership for each respective user.
|
||||
export XDG_RUNTIME_DIR=/var/run/user/`id -u`
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
# I've been trying Starship to provide a richer command prompt for zsh.
|
||||
eval "$(starship init zsh)"
|
||||
# The XDG_RUNTIME_DIR is required for Wayland to work.
|
||||
# Don't forget to actually create the directory for each relevant user and
|
||||
# give them ownership of their respective directories.
|
||||
export XDG_RUNTIME_DIR=/var/run/user/`id -u`
|
||||
|
|
@ -0,0 +1,82 @@
|
|||
#!/bin/sh
|
||||
#
|
||||
if [ "$1" = "" -o "$2" = "" ]
|
||||
then
|
||||
echo "usage: $0 notify oem_name"
|
||||
exit 1
|
||||
fi
|
||||
NOTIFY=`echo $1`
|
||||
LOGGER="logger"
|
||||
CALC="bc"
|
||||
BC_PRECOMMANDS="scale=2"
|
||||
ECHO="echo"
|
||||
CUT="cut"
|
||||
MAX_LCD_BRIGHTNESS=7
|
||||
MAX_VOLUME=14
|
||||
OEM=$2
|
||||
DISPLAY_PIPE=/tmp/acpi_${OEM}_display
|
||||
|
||||
case ${NOTIFY} in
|
||||
# 0x05)
|
||||
# LEVEL=`sysctl -n dev.acpi_${OEM}.0.bluetooth`
|
||||
# if [ "$LEVEL" = "1" ]
|
||||
# then
|
||||
# sysctl dev.acpi_${OEM}.0.bluetooth=0
|
||||
# MESSAGE="bluetooth disabled"
|
||||
# else
|
||||
# sysctl dev.acpi_${OEM}.0.bluetooth=1
|
||||
# MESSAGE="bluetooth enabled"
|
||||
# fi
|
||||
# ;;
|
||||
0x11|0x10)
|
||||
LEVEL=`sysctl -n dev.acpi_${OEM}.0.lcd_brightness`
|
||||
PERCENT=`${ECHO} "${BC_PRECOMMANDS} ; \
|
||||
${LEVEL} / ${MAX_LCD_BRIGHTNESS} * 100" |\
|
||||
${CALC} | ${CUT} -d . -f 1`
|
||||
MESSAGE="brightness level ${PERCENT}%"
|
||||
;;
|
||||
# 0x12)
|
||||
# LEVEL=`sysctl -n dev.acpi_${OEM}.0.thinklight`
|
||||
# if [ "$LEVEL" = "1" ]
|
||||
# then
|
||||
# MESSAGE="thinklight enabled"
|
||||
# else
|
||||
# MESSAGE="thinklight disabled"
|
||||
# fi
|
||||
# ;;
|
||||
0x03|0x02)
|
||||
LEVEL=`sysctl -n dev.acpi_${OEM}.0.volume`
|
||||
PERCENT=`${ECHO} "${BC_PRECOMMANDS} ; \
|
||||
${LEVEL} / ${MAX_VOLUME} * 100" | \
|
||||
${CALC} | ${CUT} -d . -f 1`
|
||||
MESSAGE="volume level ${PERCENT}%"
|
||||
;;
|
||||
0x01)
|
||||
LEVEL=`sysctl -n dev.acpi_${OEM}.0.mute`
|
||||
if [ "$LEVEL" = "1" ]
|
||||
then
|
||||
MESSAGE="volume muted"
|
||||
else
|
||||
MESSAGE="volume unmuted"
|
||||
fi
|
||||
;;
|
||||
0x04)
|
||||
LEVEL=`sysctl -n dev.acpi_ibm.0.mic_led`
|
||||
if [ $LEVEL -eq 0 ]; then
|
||||
sysctl dev.acpi_ibm.0.mic_led=1
|
||||
mixer rec 0
|
||||
fi
|
||||
if [ $LEVEL -eq 1 ]; then
|
||||
sysctl dev.acpi_ibm.0.mic_led=0
|
||||
mixer rec 30
|
||||
fi
|
||||
;;
|
||||
*)
|
||||
;;
|
||||
esac
|
||||
${LOGGER} ${MESSAGE}
|
||||
if [ -p ${DISPLAY_PIPE} ]
|
||||
then
|
||||
${ECHO} ${MESSAGE} >> ${DISPLAY_PIPE} &
|
||||
fi
|
||||
exit 0
|
||||
Loading…
Reference in New Issue